Phone: (818) 240-9313
Toll Free: (800) 275-9006
Fax: (818) 240-0256
Email:
sales@amesindustrial.com



Material Properties

Common Name/
Base Polymer

Natural or Synthetic Rubber SBR or GR-S or Buna S Butyl EPDM or EP Rubber Neoprene Nitrile or NBR or Buna-N Silicone Viton

Chemical Name

Natural or Poly-isoprene Styrene Butadiene Isobutylene Isoprene Ethylene Propylene Chloroprene Acylonitrile Butadiene Polysiloxane Fluoroelastomer

Maximum Use Temperature (Ref)

70° C 70° C 100° C 100° C 125° C 100° C 200° C 200° C

Material Designation
(ASTMD-2000, SAE J200 Class)

AA AA AA BA,CA,DA BC,BE BF,BG,BK,CH FC,FE,GE HK

ASTM Designation

NR SBR IIR EPDM CR NBR PS,PVS,SI,VSI FKM

Tensile Strength (psi)
Black Loaded Stocks

Over 3000 Over 2000 Over 2000 Over 2000 Over 2000 Over 2000 Over 1200 Over 1500

Hardness Range (Durometer A)

30-90 40-90 40-75 50-90 20-80 40-95 40-80 55-80

Adhesion to Metals

Excellent Excellent Good Good Excellent Excellent Excellent Good

Adhesion to Fabrics

Excellent Good Good Good Excellent Good Excellent Fair

Tear Resistance

Very Good Fair Good Fair Good Fair Poor Fair

Abrasion Resistance

Excellent Good to Excellent Good Good to Excellent Very Good Good Poor Fair

Compression Set

Excellent Good Fair Good Good Good Very Good Good

Resilience

               

Cold     

Excellent Good Poor Good Good Good Excellent   Good

Hot     

Excellent Good Very Good Very Good Very Good Good Excellent Good

Dielectric Strength

Excellent Good Good Outstanding Very Good Poor Good Good

Electrical Insulation

Good to Excellent Good Good Outstanding Fair to Good Poor Excellent Fair to Good

Impermeability to Gases

Good Fair Outstanding Good Good Good Fair Good

Acid Resistance

               

Mild Dilute     

Fair to Good Fair to Good Excellent Excellent Excellent Fair to Good Excellent Excellent

Strong Concentrated     

Fair to Good Fair to Good Good Good Good Good Fair Excellent

Solvent Resistance

               

Aliphatic Hydrocarbons     

Poor Poor Poor Poor Fair to Good Excellent Poor Excellent

Aromatic Hydrocarbons      

Poor Poor Poor Poor Poor Poor Poor Excellent

Oxygenated (Ketones, etc)      

Poor Poor Good Good Poor Poor Poor Poor

Lacquer Solvents      

Poor Poor Poor Poor Poor Poor Poor Good

Resistance To:

               

    Swelling in     
Lubricating Oil     

Poor Poor Poor Poor Good Very Good Poor Excellent

Oil and Gasoline     

Poor Poor Poor Poor Good Excellent Fair Excellent

Animal Oils     

Poor Poor Fair Fair Fair Excellent Good Excellent

Water Absorption     

Very Good Very Good Very Good Very Good Good Very Good Excellent   Excellent

Oxidation     

Good Fair Excellent Excellent Very Good Good Excellent Excellent

Ozone     

Poor Poor Fair to Good Outstanding Very Good Fair Excellent Excellent

Sunlight Aging     

Poor Poor Very Good Outstanding Very Good Poor Excellent   Excellent

Heat Aging     

Fair Good Good Very Good Good Good Outstanding Excellent

Low Temperature     

Very Good Very Good Good Very Good Good Fair to Good Outstanding Excellent

Flame      

Poor Poor Poor Poor Good Poor Fair Very Good

Vegetable Oils      

Poor Poor Fair Fair Good Good Poor Excellent
Chlorinated Hydrocarbons     Poor Poor Poor Poor Poor Fair Poor to Fair Excellent

Home | Products | Materials | Die Cutting | Molding | Lathe Cut | Splicing
Mold Making | Rollers | O-Rings | Extrusion | Sheet Stock | Properties | Contact


Contact Information

Telephone
800-275-9006
818-240-9313
FAX
818-240-0256
Postal address
4516 Brazil Street, Los Angeles, CA 90039
Electronic mail
General Information: sales@amesindustrial.com
Webmaster: chris@amesindustrial.com